H/w monitor, System temperature 1 to system temperature 2, Cpu core temperature (dts) – NEXCOM NDiS 126 User Manual
Page 70: Vcore to 3.3v
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
57
NDiS 126 User Manual
Chapter 4: BIOS Setup
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Pc Health Status
System temperaure1
System temperaure2
CPU core temperaure (DTS)
Vcore
12V
5V
3.3V
+21 C
N/A
+37 C
+1.088 V
+12.030 V
+5.000 V
+3.283 V
System Temperature 1 to System Temperature 2
Detects and displays the internal temperature of the system.
CPU Core Temperature (DTS)
Displays the CPU core temperature detects from DTS (Digital Thermal
Sensor).
Vcore to 3.3V
Detects and displays the output voltages.