NEXCOM NDiS 126 - Manual (Page 60)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 47 NDiS 126 User Manual
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.
Setting incorrect field values may cause the system to malfunc tion.
Save & Exit Boot Security Main
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
System ACPI Parameters. ACPI Settings
RTC Wake Settings
CPU Configuration
Intel IGD Configuration
IDE Configuration
Intel Fast Flash Standby
USB Configuration
Super IO Configuration
H/W Monitor
PPM Configuration










ACPI Settings
Enables or disables the System ACPI parameters.
RTC Wake Settings
This section is used to Enables or disables system to wake from S5 state
using RTC alarm.
CPU Configuration
This section is used to configure the CPU. It will also display detected CPU
information.
Intel ® IGD Configuration
This section is used to configure Intel ® IGD settings.
IDE Configuration
This section is used to configure the IDE devices.
Intel ® Fast Flash Standby Configuration
This section is used to configure Intel ® Fast Flash Standby Configuration.
USB Configuration
Configures the USB devices.
Advanced