5 mcu gpio setting, 6 wdt setting – NEXCOM NViS 2310 User Manual

Page 60

Appendix A: Software Demo Utility for I/O Ports of Function Control

NViS2310 User Manual

1.5 MCU GPIO Setting

1.5.1 MCU GPO Set

Selects MCU GPO ports and makes the output low or high.

1.5.2 MCU GPI Status

Shows the status of the MCU GPI.

1.6 WDT Setting

Enables or disables the WDT function. There are 9 selections of time. The
timer of WDT can also be cleared by Clear Timer button.

1.5.3 Event Button Read

Shows the status of Event Button.

Normal: 0 (default)

Triggered: 1

1.5.4 Event Record Clear

Clears the event record in MCU.

This manual is related to the following products: