Installing a wlan module (half mini-pcie), Installing a wwan module – NEXCOM NViS 2310 User Manual
Page 54
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
40
Chapter 4: System Setup
NViS2310 User Manual
Installing a WLAN Module (Half Mini-PCIe)
1. Locate the WLAN Mini PCI Express slot (CN17). Insert the module into
the Mini PCI Express slot at a 45 degrees angle until the gold-plated
connector on the edge of the module completely disappears inside the
slot. Then fasten screws into the mounting holes to secure the module.
Installing a WWAN Module
1. Locate the WWAN Mini PCI Express slot (CN26 & CN27). Insert the module
into the Mini PCI Express slot at a 45 degrees angle until the gold-plated
connector on the edge of the module completely disappears inside the
slot. Then fasten screws into the mounting holes to secure the module.
Mounting
screws
Mounting
screws