7 pcipnp – NEXCOM NPT 1550 User Manual
Page 37
30
6-7 PCIPnP
This section is used to configure settings for PCI/PnP device.
Plug & Play O/S
Yes: Configures Plug and Play (PnP) devices that are not required to boot in a Plug and
Play supported operating system.
No:
The BIOS configures all the devices in the system
Default:[No]
.
IRQ3 to IRQ15
Available The specified IRQ is available for PCI/PnP devices. Reserved The specified IRQ is
reserved for Legacy ISA devices.
Default: IRQ3,IRQ4,IRQ5,IRQ7,IRQ10,IRQ11[Reserved]。
IRQ9,IRQ14,IRQ15[Available]