NEXCOM NPT 1550 - Manual (Page 35)

28
Selects the amount of system memory used by the internal graphics device.
DVMT Mode Select
Selects the DVMT mode.
Default:[DVMT Mode]
DVMT/Fixed Memory
This field is used to select the graphics memory size used by DVMT/Fixed mode.
Default:[256MB]
Boot Display Device
This field is used to select the type of display to use when the system boots.
Default:[CRT+LVDS]
Flat Panel Type
Selects the type of flat panel connected to the system.
Default: [1024x768 18bit S]
LVDS Backlight control
This field is use to control the backlight
Default:[100%]
South Bridge Chipset Configuration