NEXCOM NPT 1550 - Manual (Page 31)

24
Boot Settings Configuration
This section is used to configure settings during system boot.
Quick Boot
When Enabled, the BIOS will shorten or skip some check items during POST. This will
decrease the time needed to boot the system.
Default:[Enabled]
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Default:[Enabled]
Bootup Num-Lock
This allows you to determine the default state of the numeric keypad. By default, the system
boots up with Num-Lock on wherein the function of the numeric keypad is the number keys.
When set to Off, the function of the numeric keypad is the arrow keys.
Default:[On]
PS/2 Mouse Support
Enables or disables the PS/2 mouse
Default:[Enabled]