NEXCOM NPT 1550 - Manual (Page 36)

29
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller Inter-face controller.
HDA Controller
Enables or disables the onboard audio.
Default:[Enabled]
SMBUS Controller
Enables or disables the SMBUS controller.
Default:[Enabled]
Restore On AC Power Loss
Off: When power returns after an AC power failure, the system’s power is off. You
must press the Power button to power-on the system.
On: When power returns after an AC power failure, the system will automatically
power-on.
Former-Sts: When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system’s power is off
when AC power failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the system will power-on
when power returns.
Default:[Power off]
Power Type
Selects the type of power supply.
Default:[ATX]
PCIE Port
Configures the Mini PCIE port.
Default :[Auto]