NEXCOM NPT 1550 - Manual (Page 28)

21
Parallel Port Mode
This field is used to select normal, ECP or EPP mode of the parallel port.
Default: [Normal]
Parallel Port IRQ
This field is used to select an IRQ for the parallel port.
Default: [IRQ7]
Serial Port1 Address to Serial Port6 Address
Auto The system will automatically select an I/O address for the onboard serial port.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manually select an I/O address for
the onboard serial port. Disabled Disables the onboard serial port.
Default: Serial Port1 Address:[3F8]
Serial Port1 IRQ[4]
Serial Port1 Voltage select [RI]
Serial Port2 Address[2F8]
Serial Port2 IRQ[3]
Serial Port2 Voltage select[RI]
Serial Port3 Address[3E8]
Serial Port3 IRQ[5]
Serial Port3 Voltage select [RI]
Serial Port4 Address[2E8]
Serial Port4 IRQ[10]
Serial Port4 Voltage select[RI]
Serial Port5 Address[4F8]
Serial Port5 IRQ[11]
Serial Port6 Address[4E8]
Serial Port6 IRQ[7]