NEXCOM PEAK 876VL2 - Manual (Page 53)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 40
Chapter 3: BIOS Setup
PEAK 876VL2/877VL2 User Manual
Chipset
This section is used to configure the system based on the specific features
of the chipset.
Setting incorrect field values may cause the system to malfunc-
tion.
BIOS SETUP UTILITY
Exit
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Security Main Advanced PCIPnP Chipset
Configure North Bridge
features.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
u North Bridge Configuration
u South Bridge Configuration
u ME Subsystem Configuration
North Bridge Configuration
This section is used to configure the north bridge features.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
North Bridge Chipset Configuration
Initiate Graphic Adapter [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
IGD GTT Graphics Memory Size [No VT mode, 2MB]
MB PCIE Configuration
PEG Port [Auto]
PEG Force GEN1 [Disabled]
u Video Function Configuration
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
IGD Graphics Mode Select
Selects the amount of system memory used by the internal graphics de-
vice.
IGD GTT Graphics Memory Size
Selects the internal graphics device’s shared memory size.
Select which graphics
controller to use as the
primary boot device.
Chipset