NEXCOM PEAK 876VL2 - Manual (Page 44)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 31
Chapter 3: BIOS Setup
PEAK 876VL2/877VL2 User Manual
ACPI Configuration
This section is used to configure the ACPI features.
Advanced ACPI
Configuration settings
Use this section to
configure additional ACPI
options.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
ACPI Settings
Suspend Mode [S1 (POS)]
Advanced
Suspend Mode
Selects the highest ACPI sleep state the system will enter when the Sus-
pend button is pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
AHCI Configuration
This section is used to configure the AHCI features.
Enables for supporting
AHCI controller operates
in AHCI mode during
BIOS control otherwise
operates in IDE mode.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
AHCI Settings
AHCI BIOS Support [Enabled]
u AHCI Port0 [Not Detected]
u AHCI Port1 [Not Detected]
u AHCI Port2 [Not Detected]
u AHCI Port3 [Not Detected]
u AHCI Port4 [Not Detected]
u AHCI Port5 [Not Detected]
Advanced
AHCI BIOS Support
Enables the AHCI controller to operate in AHCI mode.