NEXCOM PEAK 876VL2 - Manual (Page 15)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 2 PEAK 876VL2/877VL2 User Manual
Chapter 1: Product Introduction
Hardware Specifications
I/O Interfaces
• USB 2.0: 8 ports (2 onboard, 4 to backplane), 2 ports through I/O
bracket
• Serial port: 2 ports, with 2x5 pin headers (COM 1 and COM 2)
• SATA HDD: 6 ports (4 onboard, 2 to backplane), supports RAID 0/1/5/10
and Intel ® Matrix Storage Technology (Intel ® MST)
• Parallel port: 1 x 26-pin connector
• IrDA: 1 x 5-pin header
• GPIO: supports 4 sets of general purpose I/O each with TTL level (5V)
interface
• Onboard buzzer x 1
• Power LED/Power On/Reset/SMBUS: 2x8 pin header
• 1 x 4-pin fan connector (for CPU); 1 x 3-pin fan connector (for System)
• IPMB interface through PICMG 1.3 Golden-finger
• I/O On SBC Bracket
- 1 x VGA DB-15 connector
- 2 x RJ45 Gigabit Ethernet LAN ports
- 2 x USB 2.0 Ports
CPU
• Intel
® LGA1156, Core™ i7/ i5/ i3/ Pentium ® processors
Chipset
• Intel
® Q57 Express Chipset PCH
• Main Memory
• 2x 240-pin DDR3 DIMM sockets
• Supports up to 8GB 1066/1333 dual channel DIMM
• Supports non-ECC unbuffered DIMM
Onboard LAN
• 1 x Intel
® 82578DM PHY for AMT 6.0
• 1 x Intel ® 82574L PCI Express Gigabit Ethernet
• Support boot from LAN (PXE)
• 2x RJ45 with LED
Display
• PEAK 876VL2
- Intel ® Core™ i5/ i3/ Pentium ® processors Integrated graphics
- Analog display support up to 2048x1536 @ 75Hz for CRT
• PEAK 877VL2
- Intel ® Core™ i7/ i5/ i3/ Pentium ® processors Integrated graphics
- Integrated graphic engine by XGI Volari Z11 GPU with DDR2 SDRAM
through PCIe x1 Interface
- Analog VGA Interface: 230MHz pixel clocksupports CRT display up to
1600x1200 @ 70Hz 16M colors