NEXCOM PEAK 876VL2 - Manual (Page 42)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 29
Chapter 3: BIOS Setup
PEAK 876VL2/877VL2 User Manual
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Allows BIOS to select
Serial Port1 Base
Address.
BIOS SETUP UTILITY
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure Win627 Super IO Chipset
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Advanced
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Serial Port1 Address and Serial Port2 Address
Auto The system will automatically select an I/O address for the on-
board serial port.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manually select
an I/O address for the onboard serial port.
Disabled Disables the onboard serial port.
Serial Port2 Mode
COM port functions as a serial port or IrDA. You cannot use both at the
same time.
Normal Sets the COM port to serial port mode.
IrDA
Sets the COM port to IrDA mode.
ASK IR Sets the COM port to ASK IR mode.
Parallel Port Address
This field is used to select an I/O address for the parallel port.
Parallel Port Mode
This field is used to select normal, ECP or EPP mode of the parallel port.
Parallel Port IRQ
This field is used to select an IRQ for the parallel port.