NEXCOM PEAK 876VL2 User Manual

Page 40

Chapter 3: BIOS Setup

PEAK 876VL2/877VL2 User Manual

CPU Configuration
This section is used to configure the CPU. It will also display detected
CPU information.

BIOS SETUP UTILITY

Advanced

→ ←:

Select Screen

↑↓:

Select Item

+/-: Change Opt.

F1: General Help

F10: Save and Exit

ESC: Exit

Disabled for Windows XP

Configure Advanced CPU Settings

Module Version: 01.0A

Manufacturer: Intel

Intel(R) Core(TM) i5 CPU

Frequency: 3.33GHz

BCLK Speed: 133MHz

Cache L1: 128KB

Cache L2: 512KB

Cache L3: 4096KB

Ratio Status: Unlocked (Min:09, Max:25)

Ratio Actual Value: 25

Max CPUID Value Limit

Intel(R) Virtualization Tech

Enable-Disable Bit Capability

Intel(R) HT Technology

Active Processor Cores

Intel(R) SpeedStep(TM) Tech

Intel(R) C-STATE Tech

660 @ 3.33GHz

[Disabled]

[Enabled]

[All]

[Disabled]

Max CPUID Value Limit

Set this field to Disabled when using Windows XP. Set this field to Ena-
bled when using legacy operating systems so that the system will boot
even when it doesn’t support CPUs with extended CPUID function.

Intel(R) Virtualization Tech

When this field is set to Enabled, the VMM can utilize the additional hard-
ware capabilities provided by Vanderpool Technology.

Execute-Disable Bit Capability

When this field is set to Disabled, it will force the XD feature flag to al-
ways return to 0.

Intel(R) HT Technology

Enable this field for Windows XP and Linux which are optimized for Hyper-
Threading technology. Select disabled for other OSes not optimized for
Hyper-Threading technology. When disabled, only one thread per enabled
core is enabled.

Active Processor Cores

Used to enter the number of cores to enable in each processor package.

Intel(R) SpeedStep(tm) Tech

Enables or disables GV3.

Intel(R) C-STATE Tech

When enabled, CPU idle is set to C2/C3/C4.

This manual is related to the following products:

PEAK 877VL2