NEXCOM PEAK 876VL2 - Manual (Page 50)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 37
Chapter 3: BIOS Setup
PEAK 876VL2/877VL2 User Manual
Boot
Configure settings
during system boot.
BIOS SETUP UTILITY
Exit Chipset
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Security Main Advanced PCIPnP
Boot Settings
u Boot Settings Configuration
Boot
Boot Settings Configuration
This section is used to configure settings during system boot.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Configuration
Quick Boot
Quiet Boot
Bootup Num-Lock
PS/2 Mouse Support
Wait for ‘F1’ If Error
Hit ‘DEL’ Message Display
Interrupt 19 Capture
[Enabled]
[Disabled]
[On]
[Auto]
[Enabled]
[Enabled]
[Disabled]
Quick Boot
When Enabled, the BIOS will shorten or skip some check items during
POST. This will decrease the time needed to boot the system.
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Allows BIOS to skip
certain tests while boot-
ing. This will decrease
the time needed to boot
the system.
Boot