NEXCOM NEX 852VL2 - Manual (Page 8)

* 4M bits flash ROM
Chipset
* Intel ® 852GM/GME with ICH4 I/O hub
LAN
* Marvell Gigabit LAN 8001 x 2 (one is optional)
* RJ45 x 2 with LED
Display
* Intel ® 852GME integrated dynamic video shared memory, 32MB(max.) adjusted by OS
* Resolution: up to 1600x1200 for CRT or up to 1280x1024 for TFT
* D-sub 15-pin VGA port x 1
* Internal LVDS: Support 18/24 bit single pixels or 18-bit dual pixels LVDS panel (Resolution support up
to 1400 x 1050)
* Dual Display: Simultaneous Scan-CRT + LVDS LCD, Dual View-CRT+LVDS LCD
I/O interface
* Serial Port x 2, with 16C550 UART x 2 (9-pin D-sub connector x 1, 10-pin header x 1)
* USB 2.0 x 6 (4 through Combo connector with RJ45, 2 from 6-pin header)
* HDD: 40-pin connector x 2, support ultra ATA 33/66/100 (Default: IDE channel 1)
* Optional Compact Flash Socket: Internal Compact Flash socket x 1 (Default: IDE Channel 2 master),
Type-II Compact Flash Card supported
* Parallel: 25-pin D-sub connector, bi-directional, EPP/ECP support
* Floppy: 34-pin connector x 1
* PS/2 Keyboard Mouse: 6-pin Mini-DIN connector x 1
* AC 97 audio: Phone Jack x 1 (Line-in /Line-out/Mic-in)
* On-board CD-in and Aux-in
* GPIO: 4 In and 4 Out
* IrDA: Onboard 5-pin header for IrDA Tx Rx
System Monitor
* Driver support for WIN2000, XP, XPe, Linux
* Monitoring of voltage, temperature and fans
* Watchdog Timer: Programmable via GAL by Software from 1-127 sec. or 1-127 min.
7