NEXCOM NISE 2300 - Manual (Page 89)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 75 NISE 2300 User Manual
Chapter 4: BIOS Setup
H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
CPU Temperature
Detects and displays the current CPU temperature.
System Temperature
Detects and displays the current system temperature.
CPU FAN Speed
Detects and displays the CPU fan speed.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Pc Health Status
CPU Temperature
System Temperature
CPU FAN Speed
System FAN Speed
CPU: Vcore
+3.3V
+12V
+5V
: +39 C
: +40 C
: N/A
: N/A
: +1.184 V
: +3.328 V
: +11.827 V
: +5.017 V
Device Mode
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Change the Printer Port mode. Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=378h; IRQ=5;
[IO=378h; IRQ=5;]
[Standard Parallel ...]
Device Mode
Standard Parallel Port Mode
EPP Mode
Configures the operating mode of the parallel port, the options are Standard
Parallel Port Mode, EPP Mode, ECP Mode and EPP Mode & ECP Mode.
ECP Mode
EPP Mode & ECP Mode