NEXCOM NISE 2300 - Manual (Page 74)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 60 NISE 2300 User Manual
Chapter 4: BIOS Setup
This field is used to enable or disable hyper-threading.
Hyper-Threading
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for Hyper-
Threading Technology) and
Disabled for other OS (OS not
optimized for Hyper-Threading
Technology).
CPU Configuration
Processor Type
EMT64
Processor Speed
System Bus Speed
Ratio Status
Actual Ratio
System Bus Speed
Processor Stepping
Microcode Revision
L1 Cache RAM
L2 Cache RAM
Processor Core
Hyper-Threading
Hyper-Threading
Intel(R) Atom (TM) CPU
Not Supported
1865 MHz
533 MHz
14
14
533MHZ
30661 (B3 Stepping)
262
2x56 k
2x512 k
Dual
Supported
[Enabled]
Hyper-Threading
Disabled
Enabled
SATA Configuration
This section is used to configure the SATA drives.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select IDE / AHCI / RAID Mode SATA Configuration
SATA Port0
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Mode
Hitachi HTE545 (160.0
Not Present
TS16GCFX500 (15.8G
Not Present
Not Present
Not Present
[AHCI Mode]