Installing a 3.5g module (full size) – NEXCOM NISE 2300 User Manual
Page 59
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
45
NISE 2300 User Manual
Chapter 3: System Setup
Installing a 3.5G Module (full size)
1. Locate the Mini PCI Express slot on the board. Remove the LAN module
bracket and put it in a safe place.
Mini PCI Express Slot
Wifi module bracket
Screw
2. Insert the wireless LAN module into the Mini PCI Express slot at a
45 degree angle until the gold-plated connector on the edge of the
module completely disappears inside the slot.
3.5G module
Screw
3. Push the module down and then secure it with mounting screws.
This manual is related to the following products: