Change settings, Parallel port, Selects an optimal setting for the super io device – NEXCOM NISE 2300 User Manual
Page 88
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
74
NISE 2300 User Manual
Chapter 4: BIOS Setup
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Parallel Port
(LPT/LPTE)
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=378h; IRQ=5;
[IO=378h; IRQ=5;]
[Standard Parallel ...]
Parallel Port
Disabled
Enabled
This field is used to enable or disable the parallel port.
Change Settings
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select an optimal setting for
Super IO device.
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=378h; IRQ=5;
[IO=378h; IRQ=5;]
[Standard Parallel ...]
Change Settings
IO=378h; IRQ=5;
IO=378h; IRQ=5,6,7,10,11,12;
Selects an optimal setting for the Super IO device.
IO=278h; IRQ=5,6,7,10,11,12;
IO=3BCh; IRQ=5,6,7,10,11,12;
IO=378h;
IO=278h;
IO=3BCh;
Parallel Port