NEXCOM NISE 2300 - Manual (Page 49)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 35 NISE 2300 User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Bottom Cover
Note: Installation for SATA Hard Drive and SATA DOM only
CAUTION! CAUTION! CAUTION!
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. With the bottom side of the chassis facing up, remove the mounting screw
of the bottom cover and then put them in a safe place for later use.
2. Lift up the cover and remove it from the chassis.