Change settings, Onboard serial port 1 mode, Selects an optimal setting for the super io device – NEXCOM NISE 2300 User Manual
Page 81
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
67
NISE 2300 User Manual
Chapter 4: BIOS Setup
Change Settings
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select an optimal setting for
Super IO device.
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port 1 Mode
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2F8h; IRQ=3;
[IO=2F8h; IRQ=3;]
[RS232]
[115200 bps]
Change Settings
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=4;
Selects an optimal setting for the Super IO device.
IO=3E8h; IRQ=6;
IO=2E8h; IRQ=7;
Onboard Serial Port 1 Mode
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Change the Serial Port 1 mode.
Select
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port 1 Mode
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2F8h; IRQ=3;
[IO=2F8h; IRQ=3;]
[RS232]
[115200 bps]
Onboard Serial Port 1 Mode
RS232
RS422
This field is used to configure the mode of serial port 1 as RS232, RS422,
RS485 or RS485 AUTO.
RS485
RS485 AUTO