NEXCOM NISE 2300 - Manual (Page 57)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 43 NISE 2300 User Manual
Chapter 3: System Setup
Installing a SO-DIMM
1. Locate the SO-DIMM socket.
SO-DIMM
socket
DIMM1
DIMM2:
1
st DIMM to be installed
2. Release the lock of the SO-DIMM socket.
Lock
3. Insert the module into the socket at an 90 degree angle. Apply firm and
even pressure to each end of the module until it slips into the socket.
SO-DIMM
SO-DIMM (Lock type)
4. While pushing the SO-DIMM into the position, the lock will close
automatically.
1
2
NOTE: If only one SO-DIMM will be installed, DIMM 2 must be installed first.