NEXCOM NISE 2100 - Manual (Page 78)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 65
Chapter 4: BIOS Setup
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual
SMBUS Controller
Enables or disables the SMBUS.
Restore On AC Power Loss
Power Type
Selects the type of power used.
PCIE Port 0 and PCIE port 1
Configures the PCIE ports.
Power Off When power returns after an AC power failure, the system’s
power is off. You must press the Power button to power-on
the system.
Power On When power returns after an AC power failure, the system
will automatically power-on.
Last State When power returns after an AC power failure, the system
will return to the state where you left off before power
failure occurs. If the system’s power is off when AC power
failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the
system will power-on when power returns.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Configuration
USB Functions [10 USB Ports]
USB 2.0 Controller [Enabled]
HDA Controller [Enabled]
SMBUS Controller [Enabled]
Restore on AC Power Loss [Power On]
Power Type [ATX]
PCIE Ports Configuration
PCIE Port 0 [Auto]
PCIE Port 1 [Auto]
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
Chipset
Power Off
Power On
Last State
Options