NEXCOM NISE 2100 - Manual (Page 27)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 14
Chapter 2: Jumpers and Connectors
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual
Jumper Settings
A jumper is the simplest kind of electric switch. It consists of two metal
pins and a cap. When setting the jumpers, ensure that the jumper caps are
placed on the correct pins. When the jumper cap is placed on both pins,
the jumper is short. If you remove the jumper cap, or place the jumper
cap on just one pin, the jumper is open.
Refer to the illustrations below for examples of what the 2-pin and 3-pin
jumpers look like when they are short (on) and open (off).
Two-Pin Jumpers: Open (Left) and Short (Right)
Three-Pin Jumpers: Pins 1 and 2 Are Short