Chapter 3: system setup, Removing the chassis cover – NEXCOM NISE 2100 User Manual

Page 49

Text mode
Original mode

Chapter 3: System Setup

NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual

Chapter 3: System Setup

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.

1. The screws on the top cover are used to secure the cover to the chassis.

2. Remove these screws and then put them in a safe place for later use.

3. The SODIMM, Mini-PCIe and CompactFlash sockets are readily acces-

sible upon removing the cover.

The dots denote the locations of the screws.

SODIMM

CompactFlash

Mini-PCIe

This manual is related to the following products:

NISE 2100A NISE 2110 NISE 2110A