NEXCOM NISE 2100 - Manual (Page 77)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 64
Chapter 4: BIOS Setup
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual
DVMT Mode Select
The options are Fixed mode and DVMT mode.
DVMT/Fixed Memory
This field is used to select the graphics memory size used by DVMT/Fixed
mode.
Boot Display Device
This field is used to select the type of display to use when the system
boots.
Flat Panel Type
South Bridge Configuration
This section is used to configure the south bridge features.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Configuration
USB Functions [10 USB Ports]
USB 2.0 Controller [Enabled]
HDA Controller [Enabled]
SMBUS Controller [Enabled]
Restore on AC Power Loss [Power On]
Power Type [ATX]
PCIE Ports Configuration
PCIE Port 0 [Auto]
PCIE Port 1 [Auto]
USB Functions
Enables or disables USB devices.
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller Inter-
face (USB 2.0).
HDA Controller
Enables or disables the onboard audio.
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
Chipset
Selects the type of flat panel connected to the system. The supported
LVDS are 640x480 18bit, 800x600 18bit, 1024x768 18bit and 1280x800
18bit.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
North Bridge Chipset Configuration
PCI MMIO Allocation: 4GB to 3072MB
Initiate Graphic Adapter [IGD]
Internal Graphics Mode Select [Enabled, 8MB]
DVMT Mode Select
DVMT/FIXED Memory
Boot Display Device
Flat Panel Type
Select which graphics
controller to use as the
primary boot device.
Chipset
640x480 18bit S
800x600 18bit S
1024x768 18bit S
1280x800 18bit S
Options