Installing a sata dom – NEXCOM NISE 2100 User Manual
Page 61
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
48
Chapter 3: System Setup
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual
Installing a SATA DOM
1. Locate the SATA connector on the board.
SATA
connector
2. Align the SATA connector located on the solder side of the SATA DOM
to the SATA connector that is on the board and then press it down
firmly. Secure the SATA DOM with the provided mounting screw.
SATA DOM
Mounting screw
SATA connector
Solder side of
SATA DOM
This manual is related to the following products: