Monroe Electronics Charge Plate - Monitor - model 288B - Manual (Page 10)

10
SETUP - OPTION Menu:
Options are for display backlighting, power off, and beep settings. The first two options will apply
when the 288 unit is running on battery.
Figure 6. Setup – Option
The first two options apply to when the
288 unit is using battery power.
Highlight and press EDIT to view further
options.
Figure 7. Setup – Option - Backlight
The (A>) symbol indicates the current
choice. Highlight desired choice and
press ACTIVE. Then press EXIT change.
The backlight of the display can be set to
continuous lighting or shut off in 5
minutes when it is using battery.
Figure 7b. Setup – Option – Auto DC Power Off
When the 288 unit is running on battery, it
can be set to run Continuously or auto shut
off in 15 minutes.
Highlight the option by pressing the NEXT
key, then press ACTIVE.
In Figure 6, highlight the option, then press the EDIT key.
The Beep has three options:
Beep On Test & Key ___ Beep when a key is pressed and mode change during the test.
Beep On Test Only. ___ Beep only during the test when the mode changed.
Beep Off.
SETUP OPTION
Backlight .
Auto DC Power Off
Beep On Test & Key
NEXT EDIT EXIT
Backlight DC
Continuous
A> Auto Shut Off (5 minutes)
Off
NEXT ACTIVE EXIT
Auto DC Power Off
Continuous
A> Auto Shut Off (15 minutes)
NEXT ACTIVE EXIT