KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 37)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 37 of 70
9.
Lift up the back of the speaker,
align the Stacking Link (A) with
the drill hole for the desired angle
and secure the connection with the
Quick Release Pin (B).
A
B
10. Push the front joint plates out of the first speaker and secure them with the Quick
Release Pins.
11. Prepare the next speaker as described in steps 2 - 3.
12. Place the next speaker on the stack and secure the front connections with two Quick
Release Pins.
13. Place the joint plate between the drill holes for the desired angle and connect them with
the Quick Release Pin.
14. Proceed accordingly with the remaining speakers.
15. Wire the array. Follow the instructions in chapter Connection beginning on page 44.