KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 3)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 3 of 70
Table of contents
1 Introduction 6
1.1 Symbols in User's Manual 6
1.2 Information about this User's Manual 6
2 Scope of Delivery 7
2.1 Scope of Delivery SEQUENZA 10 N/W 7
2.2 Scope of Delivery SEQUENZA 10 B 7
2.3 Scope of Delivery SEQUENZA 10 Flying Frame 7
3 Required Tools 7
4 System Requirements for Use 7
5 Product Description 7
5.1 SEQUENZA 10 N/W 7
5.1.1 Overview SEQUENZA 10 N/W Parts 7
5.2 SEQUENZA 10 B 9
5.2.1 Overview SEQUENZA 10 B Parts 9
5.3 SEQUENZA 10 flying frame 10
5.3.1 Overview of flying frame Components 10
6 Safety Instructions 11
6.1 Safety Instructions for Flown Setup 11
6.2 Safety Instructions for Stacked Setups 12
6.3 Wind Loading 14
6.4 Preventing hearing damage 16
6.5 Protecting the Speakers / Operating Safety 16
7 Using the Quick Release Pins 17
8 Removing the Transport Covers 17
9 Positioning of the Load Adapters 17
10 Flown Setup 20
10.1 Combining the Speaker Array 20
10.1.1 Array with SEQUENZA 10 N/W 20
10.1.2 Array with SEQUENZA 10 B 24
10.1.3 Array with SEQUENZA 10 N/W and SEQUENZA 10 B 27
10.2 Lifting the Array 28
10.2.1 Arrays with SEQUENZA 10 B 28
10.2.2 Arrays with SEQUENZA 10 N/W and 5m maximal Length 28
10.2.3 Arrays with SEQUENZA 10 N/W exceeding a Length of 5m 30
11 Flown Disassembly 32
11.1 Disassembly of arrays with SEQUENZA 10 N/W exceeding a Length of
5m
33