KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 25)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 25 of 70
3.
Connect the speakers, as illustrated,
on both sides with the Quick
Release Pins.
You create a speaker connection
by using a total of 8 Quick Release
Pins.
Make sure all pins fit correctly and
are locked into place.
4. Proceed accordingly with all speakers in the array.
5.
Stand the flying frame up vertically
and remove the Quick Release Pins
6.
Caution
To prevent the frame from tipping forward with the first speaker, always connect the
speakers to one another first before connecting the flying frame. Tipping of the flying
frame with speakers can result in injuries.
7.
Place the frame in front of the top
speaker so that the joint plates
(1) protrude into the flying frame,
then connect them using the Quick
Release Pins (2).