KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 19)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 19 of 70
Take the load adapter (A) out of the
stand-by position and place it on the
hole position that was determined by the
simulation software CON:SEQUENZA.
Mount the load adapter with 2 Quick
Release Pins (A).
With a two-strand rigging, proceed with
the second load adapter accordingly.