KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 18)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 18 of 70
The drill holes in the flying frame are numbered consecutively from 1 to 27, beginning on the
front end of the frame (Front). For your orientation, the drill holes 5, 9, 15, 20, and 26 are
labelled.
You can set the position of the load adapters in 1/2-steps because they are usable on
both sides. This doubles the grid of the row of drill holes in the flying frame and thus the
adjustment possibilities. The load adapters are labelled with '1/1 Grid' on the one side and
'1/2 Grid' on the other. The simulation software CON:SEQUENZA gives you the information
whether a load adapter should be mounted in the 1/1 or the 1/2 position. In the 1/1 position
(A), the arrow on the 1/1 side of the load adapter must point toward the front side of the
flying frame (Front). In the 1/2 position (B), the arrow on the 1/2 side of the load adapter
must point toward the front side of the flying frame (Front).
26
REAR FOOT
PINS ONLY !
CABLE PICK
AND
ADJUSTMENT
POINT
5 9
FLYING +3°
FLYING 0°
STACKING
B
A
15 20
INCLINATION
STACKING TABLE
B
-2.4 °
-3.2 °
-4.4 °
-5.2 °
-6.4 °
-7.3 °
-8.5 °
-9.2 °
A
2.9°
2.0°
0.9°
0.0°
-1.1 °
-2.0 °
-3.1 °
-4.0 °
CABINET
7°
5°
6°
4°
3°
2°
1°
0°
MODEL:
SEQUENZA 10
FLYING FRAME 24
SECURE FRAME WITH A SECONDARY 2 LEG SAFETY !
TO BE USED BY QUALIFIED RIGGERS ONLY !
READ MANUAL AND SAFETY INSTRUCTIONS BEFORE USE !
SUSPEND K&F SEQUENZA 10
Manufacturing Year:
41kg Ser.-No.: Weight:
SAVE WORKING LOAD:
(BGV C1 / SF 5 / SECONDARY SAFETY)
MINIMUM 625 kg
@ALL HOLE POSITIONS
MAXIMUM 1000 KG
FROM HOLE POSITION 1 TO 21
1, 2, 3, 4, 5, 6, 7, 8, 9,10...............15................20........................27
A B
A = Load adapter 1/1 grid position
B = Load adapter 1/2 grid position
Instructions for mounting the load adapter
Calculate the correct position of load adapters with the simulation software CON:SEQUENZA.
CON:SEQUENZAIn this calculated position, the array is guaranteed to fly at the desired angle
later, and the sound will be emitted correctly.
Warning
Always mount a load adapter with 2 Quick Release Pins!