beautypg.com

Receiver description (continued) – KBC Networks MiniLink User Manual

Page 7

background image

RECEIVER DESCRIPTION (Continued)

WIRING DIAGRAM















E. CABLING SPECIFICATIONS

NOTE: Coaxial cables are not included in a MiniLink wireless system. Supplied for the installation are two

weatherproof F-Connectors which are to be crimped onto the RG 6 coaxial cable.

• RG 59 Coaxial Cable: Up to 500 feet (Use between Receiver and DVR/Monitor

as well on transmit end: between Camera and Transmitter)

• RG 6 Coaxial Cable: Up to 100 feet to be used between LNB receive antenna

typically mounted outdoors and Receiver located in the head end room.

• Given wide open line-of-sight and no 5 GHz interfering sources in a particular

environment, a MiniLink wireless system will transmit and receive the video
quality that is coming from the camera or over the cables connected to that
wireless system. Cables in poor condition or even insufficient crimping could
result in undesired operation. All crimps or other connections must be made using
industry standard tools. Also verify that all cables being used are free of cuts,
gouges, kinks, or bends that can have an effect on your video quality. A hardwire
set-up (without the wireless link) on a bench test will help to verify the above
suggestions.

• Power cables should be kept at their normal stock length to avoid problems that

may arise which could be outside of KBC technical support field of expertise.
However, if power cables must be extended for a particular application, KBC
does not suggest any wire lighter than 18-gauge in order to avoid voltage loss.










- 5 -

Audio Out RCA

DVR/Monitor Video In BNC

Extra Video Out BNC

12VDC
Power
Supply

IMPORTANT: Use only RG 6 coaxial cable
with the supplied weatherproof “F” connectors to
connect Receiver and LNB. Cable length should
be a minimum of 10 feet and not exceed 100 feet.

Up to 1000 feet clear line-of-

sight using base range 1000’

system (as pictured)

Audio source

Video source

Power input

Power indicator