KBC Networks MiniLink - Manual (Page 13)

TRANSMITTER SPECIFICATIONS
MINILINK® 5.8 TRANSMITTER
RF SECTION
Power Output 50 mV/Meter @ 3 Meters
Transmitting Frequency 5741, 5754, 5767, 5780, 5793, 5806, 5819, 5832, 5845,
5858 MHz
FCC ID (Directional Transmitter) JRR-PS37-4
FCC ID (Omni-directional Transmitter) JRR-PHL4-13
IC: (Directional Transmitter) 4887A-PS37
IC: (Omni-directional Transmitter) 4887A-PHL4
VIDEO SECTION
Color Format NTSC
Pre-emphasis CCIR 405-1, 525 lines
Input Level 1.0 V P-P @ 75 Ohms
AUDIO SECTION
Input Level Line Level 0.5 V P-P @ 10 K Ohms
Microphone Level 50 mV P-P
Powered Input +5 V @ 25mA
MECHANICAL - DIRECTIONAL
Dimensions 2.75” x 2.75” x 1.5”
Weight 9.04 oz
Connections Power supply, video BNC, Audio BNC
MECHANICAL – OMNI DIRECTIONAL
Dimensions 1.5” x 2.4” x 0.43” (w/out antenna)
Weight 1.8 oz
Connections Power, video, audio and ground on
4 pin plug.
(Video, audio and ground connections are 4 inch
24 AWG leads)
POWER
Power Requirements 6-14.5 VDC @ 100 mA
Reverse voltage protected
ENVIRONMENTAL
Humidity 95% non-condensing
Operating Temperature -20F to +180F
*For product improvement, design and specifications are subject to change without notice.
SYSTEM RANGES (Ranges assume an ideal wireless environment)
Transmitter to 4” LNB 1000 feet (Clear line of sight, no 5 GHz interference)
Transmitter to 6” x 6” Patch LNB 2500 feet (Clear line of sight, no 5 GHz interference)
Transmitter to 18” Parabolic Dish 1 Mile (Clear line of sight, no 5 GHz interference)
- 11 -