ILUMINARC Ilumipod™ Inground Tri-12 IP - Manual (Page 14)

Installation
10 Ilumipod Inground IP Series User Manual (Rev. 4)
To assign
individual DMX
addresses to
each product, you
must connect the
Ilumicode controller to
each product, individually.
ILUMINARC®
suggests that you
connect no more
than 20 products
in this mode and keep the
total distance to less than
60 m (197 ft). Otherwise,
you might need to use an
optically isolated signal
amplifier.
Ilumicode
The diagram below shows how to connect the Ilumicode to this product.
Note that this connection will control multiple products at the same time, all having the same
DMX address.