ILUMINARC Ilumipod™ Inground Tri-12 IP - Manual (Page 13)

Installation
Ilumipod Inground IP Series User Manual (Rev. 4) 9
If you have not
configured the
DMX starting
address and DMX
mode for each product,
they will all use their
default values. This
means that all products
will operate in unison.
Refer to the
Operation chapter
to learn how to
enable the
Ilumipod Inground IP
products to operate with
the ILUMICON controller.
Controllers
The products in the Ilumipod Inground IP Series can operate with a standard DMX controller,
the ILUMICON controller, or the Ilumicode controller. The sections below will show you how
to connect these products to the corresponding controllers. The instructions to operate these
products with each of the above controllers are in the Operation chapter of this manual.
DMX Controller
The Ilumipod Inground IP products can work with a standard DMX controller. The channel
assignments will depend on the chosen personality (see the corresponding Menu Map on
pages 11 and 12) and the DMX address assigned to each product
(see Programming on page 13).
The figure below illustrates how to connect the DMX controller to the Ilumipod Inground IP
products.
ILUMICON
The Ilumipod Inground IP Tri and RGB products can also work with the ILUMICON
controller instead of a standard DMX controller. Please refer to the ILUMICON User Manual
to learn how to use this controller with the Ilumipod Inground IP products.
The figure below illustrates how to connect the ILUMICON controller to the Ilumipod
Inground IP Tri and RGB products.