ILUMINARC LΩGIC™ 1X36 - Manual (Page 14)

Installation
10
LΩGIC™ 1X36 User Manual Rev. 08
Make sure to
mount this
product away
from any flammable
material as indicated in
the Safety Notes.
Please consult
local electrical
code compliance
and regulations for any
additional installation
restrictions.
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Orientation
Always mount this product in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Installation
The
LΩGIC™ 1X36 consists of a single product with two (2) mounting points with 5mm
holes. ILUMINARC ® recommends following the general guidelines below when mounting
the
LΩGIC™ 1X36.
· When selecting an installation location, consider ease of access to the product for
operation, programming adjustments, and routine maintenance.
· Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
· Make sure that the location where you are mounting the product can support its weight.
Please see the Technical Specifications section of this manual for the weight
requirement of this product.
Procedure
The
LΩGIC™ 1X36 has two screw holes built into the casing which serve as mounting
points. Use 2 screws to attach the products to a flat, dry surface. Make sure that you can
access the product for maintenance and programming.