ILUMINARC LΩGIC™ 1X36 - Manual (Page 12)

Installation
8
LΩGIC™ 1X36 User Manual Rev. 08
When
connecting
LΩGIC™
devices to the
LΩGIC™ 1X36 controller,
do not exceed the
maximum of 12 LEDs per
output channel (36 LEDs
total for the output line).
Maximum Output Line Loading
The
LΩGIC™ 1X36 product has a single output line. The single output line has three channels
whose names change depending on the selected operation mode. (Red, Green, and Blue in the
RGB mode, or Warm, Natural, and Cool in the SpectraWhite™ mode). Each channel can
support up to 12 LEDs. This means that the maximum number of LEDs supported by the output
line is 36.
Inside the
LΩGIC™ devices, the LEDs are grouped in clusters of three LEDs each. In an LED
cluster, each LED connects to an individual output channel from the
LΩGIC™ product. When a
device has more than one cluster, the same output channel supports as many LEDs as clusters
the device has.
Please see the guide below for the output line loading. This table shows the maximum number
of a single type of devices that can be loaded onto the
LΩGIC™ 1X36’s output line.
M ODEL N AME T OTAL LED’ S
M AX . NUMBER OF
CONNECTED P RODUCTS
Ilumiline LΩGIC™ 36 RGB
36 1
Ilumiline
LΩGIC™ 24 RGB
24 1
Ilumiline
LΩGIC™ 24 Optic RGB
24 1
Ilumiline LΩGIC™ 12 Optic
12 3
Ilumiline LΩGIC™ 12
12 3
Ilumipod
LΩGIC™ 12 Optic
12 3
Ilumipod
LΩGIC™ Tri-4
12 3
Ilumipod
LΩGIC™ 6 Optic
6 6
Ilumipod
LΩGIC™ 3 Optic
3 12
Ilumipod
LΩGIC™ Tri-1
3 12
You may also combine different devices together, as long as you do not exceed the maximum
of 36 LEDs for the output line. Please see the following example of a possible combination.
Ilumipod
LΩGIC™ Tri-4
12 X 2 = 24 2 products
Ilumipod
LΩGIC™ 6 Optic
6 x 2 = 12 2 products
Total 36 LEDs 4 products