Future Automation MLS - Manual (Page 7)

D
DETAIL D
SCALE 1 : 4
Once the base panel has
been positioned correctly
and properly secured, it
is then possible to re-attach
the mounting frame.
Firstly make sure the
mechanism is in the
'Home' position.
Then the screen mounting
frame can be bolted down.
Make sure the mounting
frame is square with the
slot in the cabinet.
Stage 5
Positioning the base panel
Loosen off the wood screws on the under
side of the lifting beam and move the
base to the centre of the opening.
There should be a gap of about 3mm
around the edges of the base panel
to the cabinet.
MOUNTING
THE FRAME
Sheet 6 of 18
ISSUE: 011
www.futureautomation.co.uk
FUTUREAUTOMATION
MLS
Marine Lift Swivel Mechanism
Instruction Sheet