Future Automation MLS - Manual (Page 11)

Before mounting any screen, press STOP on the IR
remote in order to prevent any motor movements
during the mounting procedure.
Make sure the swivel is in the HOME position!
Simply mount the screen on to the mount supplied
with your mechanism. The example below
shows a Group A framework.
Stage 9
Fixing the screen to the lift
The height of the inner framework is
adjustable. The inner uprights will
slide inwards to allocate different
mounting systems.
CABLES
When the screen is in
position, the cables can be
connected and run down
into the cabinet.
Pass the cables through
the centre of the aluminium
shaft at thye base of the
framework. Once inside the
cabinet, pass the cables
into the cable management
system. This resembles a
black chain running from
the beam to the base of the
cabinet that the cables can
be pushed inside to keep
them tidy.
The cable management
system is circled near left.
Sheet 10 of 18
ISSUE: 011
www.futureautomation.co.uk
FUTUREAUTOMATION
MLS
Marine Lift Swivel Mechanism
Instruction Sheet