Future Automation MLS - Manual (Page 5)

B
DETAIL B
Stage 3
Fixing the lift in the cabinet
Place the mechanism within the cabinet.
Raise the beam to the top and guide base
through the opening in the top. IR remote
STOP button will stop the lift.
With the base properly located, use the 8
pointed screws supplied, 4 on each side,
to pin the mechanism in place, fixing its
position left and right. These 8 screws
should be screwed through the middle
hole of each of the clusters of 3,
shown below right.
With the lift fixed in position, use 8 wood
screws on each side to secure the
lift to the cabinet.
Sheet 4 of 18
ISSUE: 011
www.futureautomation.co.uk
FUTUREAUTOMATION
MLS
Marine Lift Swivel Mechanism
Instruction Sheet