DT Videolabs PlaybackPro Plus - Manual (Page 6)

Main Tab
• File Path Indicator - Shows the path and name of the
referenced file.
• Set In - Sets where clip will begin playback.
• Set Out - Sets where clip will end playback.
• Set Slate - Used to set the Slate image for that clip.
• Fade-In Duration - Tells clip how long to Fade-In on start.
• Fade-Out Duration - Tells clip how long to Fade-Out on end.
PlaybackPro Plus User Guide
Page 5
Clip Settings:
The Clip settings determine how a clip is played back in Program, and only affects the
selected clip (whether in Preview or Program). All settings are saved automatically when the
Show File is saved.
Levels
Affects the black level, gain, gamma, color, hue and volume
of the current clip. If the clip is in Program, changes are seen
on the video output (as well as in the Program section).
Levels can be Copied and Pasted between clips using the
Copy Levels and Paste Levels Buttons.
Levels can be reset by clicking the Default Levels Button.
Geometry
Controls the size, aspect ratio and positioning of the clip
being previewed and will be stored as altered. If the clip is in
Program, changes are seen on the video output (as well as in
the Program section).
Geometry can be Copied and Pasted between clips using the
Copy Geometry and Paste Geometry Buttons.
Geometry can be reset by clicking the Default Geometry
Button.