Doremi Nugget - Manual (Page 51)

14 Control Protocol
The Nugget can be controlled using the RS422 port or using TCP/IP.
The Nugget uses the standard P2 protocol or otherwise known as the Sony 9-pin protocol for
non-file related functions and it uses the Odetics protocol to load and browse files.
Developers can send an email to [email protected] to get a complete Nugget Control
Protocol document.
14.1 Controlling the Nugget using the Serial Port
To control the nugget using the serial port, you need to have the proper RS422 cable.
• If you are using a controller with an RS422 serial port, use the standard RS422 cable.
• If you are using a PC with an RS232 port, use the RS422-PC cable included with the
Nugget
• If you are using a Mac with a mini-DIN8 RS422 cable, use the RS422-MAC.
• All these cables are described in the following sections:
NUG.OM.000105.DRM Page 51 Version 3.1
Doremi Labs, Inc.