Doremi Nugget - Manual (Page 19)

• The “Audio/Video ”tab: access audio/video specific parameters of the selected device.
“Device settings” for Nugget - General and Audio/Video Tabs
“Device Setting” functions:
1. To save the changes you have made to the unit, click “Apply” when you are done.
2. To save the changes you have made to the flash (default settings after power up), click
“Save as default”.
3. To export the current settings to a file, click “Save,” you will then be prompted to enter a
settings filename.
4. To abort the changes and restore the unit’s current settings, click “Discard”.
5. To load an existing settings file from your computer, click “Load”, select the
corresponding settings file then hit “Save settings”.
6. The Local/Remote and Visual Cues sections will only appear on the Nugget Post.
7. The Time Mode section is grayed out on the Nugget Post but it is enabled on the Non-
post version
NUG.OM.000105.DRM Page 19 Version 3.1
Doremi Labs, Inc.