Doremi Nugget - Manual (Page 16)

3.3 Adding Nugget Units to DoremiAM
• If DoremiAM is minimized, double click on its icon to bring it up. Under the Device tab,
select the Default Group or create a new Group then click on New Device.
• Type the Name, as you want it to appear, and type the IP address of the Nugget you
want to add. You can organize the units by groups if needed.
• Add all Nugget units in your facility.
Device Manager
The Device Manager will help you manage the devices that are connected to the DoremiAM.
This function is for your convenience and will allow you to easily manage each device. See the
“Device Tab Window” located on the DoremiAM's main GUI below, which shows how each
connected device will appear in the “Device Manager Window.”
• For each device, either a red X or a green check mark will appear.
• The red X indicates that the device is currently not connected.
• The green check mark indicates that the device is connected.
DoremiAM GUI-Device Tab Window
NUG.OM.000105.DRM Page 16 Version 3.1
Doremi Labs, Inc.