Doremi Nugget - Manual (Page 21)

The “Send to Doremi Devices” Window above illustrates an example of a folder being
transferred from the database to the Nugget. The green check-mark indicates that the selected
device (the Nugget) is connected. By clicking the “Apply Selection To All” button you are able to
transfer the folder to more than one unit at a time.
Using DoremiAM Database to Transfer a Clip to the Device
To transfer a clip from the database a connected Nugget:
• Go to the “Clip database” tab;
• Select the media file(s) to transfer;
• Click on the “Send to Doremi devices” button;
• Select the unit(s) you wish to send the file to;
• Click on “Finish” to start the transfer.
• Go to the “Tasks” tab to see the progress of the transfers. To see a list of all the new
files, click “Update” on the “Clip Database” tab. Note: The update process takes
approximately 30 seconds.
Note: At this stage you can also choose to schedule the transfer instead of starting it right away.
This procedure is detailed in the DoremiAM manual under the heading “Scheduling Transfers.
You can see the progress of the file transfer in the “Tasks” tab as shown below:
Clip Transfer Progress- “Task” tab
NUG.OM.000105.DRM Page 21 Version 3.1
Doremi Labs, Inc.
Transfer
progress