Fidelio micro sd card replacement, Fidelio tablet, V1.1.2 – Doremi Fidelio User Manual
Page 52
![background image](https://www.manualsdir.com/files/769004/content/doc052.png)
FDO.OM.001852.DRM
Page 52 of 77
Version 1.5
Doremi Labs
9
Fidelio Micro SD Card Replacement
The Fidelio Micro SD Card (Figure 53and Figure 54) is where the system's auditorium
assignments are stored. In the event a touchscreen tablet needs to be replaced, you will need to
remove the system's original micro SD card so that it can be installed into the replacement
touchscreen tablet. Otherwise, you will be required to re-assign all of the Fidelio Transmitters
located throughout the complex.
The following steps explain this procedure.
Important: The Fidelio Touchscreen Tablet must be powered down completely before
installing/removing a micro SD card.
9.1 Fidelio Tablet
– v1.1.2
Figure 53: Micro SD Card Pointing Up
Figure 54: Micro SD Card Pointing Down
Figure 55: Fidelio Tablet
– Micro SD Slot
Insert the micro SD card into the Fidelio Tablet while making sure the top of the micro
SD card is upright and the copper contacts on the backside go into the slot first (Figure
55 and Figure 56).
Copper
Contacts
Micro SD
Slot