Doremi Fidelio - Manual (Page 10)

FDO.OM.001852.DRM Page 10 of 77 Version 1.5
Doremi Labs
1 Introduction
1.1 Overview
The Doremi Fidelio is an audio distribution system carrying two stereo channels from a single
transmitter unit to a number of receiver units. This product was designed to enhance and assist
people who are visually and/or hearing impaired in a motion picture theater. This manual will
guide you through the steps necessary to physically set up and connect the Fidelio device. The
entire Fidelio setup consists of a Transmitter, Receiver, Charging/Configuration Station, Touch
Screen Tablet, Audio Interface Box and Headset. The Receiver device docks to the charger,
which can be used for multiple purposes including:
 Recharging the battery
 Configuration

Upgrading firmware
 Production tests
1.2 Fidelio System Parts

(1) - Fidelio Transmitter – FIDELIO-TX

(1) - Fidelio Transmitter Antenna -FIDELIO-TX-ANT

(1) - 2 meter USB cable A-B -CBL-USB-GHX

(1) - Fidelio Audio Interface Box
– FIDELIO-AI

(1) - 1 meter DB25 cable, M-F, 1-to-1 pin out -CBL-DB25M-DB25F-2.5

(2) - 1-meter CAT5 Ethernet cable -CBL-ENET-1M

(1) - Fidelio Receiver with Belt-clip – FIDELIO-RX

(1) - Fidelio Headphone - FIDELIO-RX-HP

(1) - Fidelio Charging Station
– FIDELIO-WAC

(1) -
7” Tablet Mounting Bracket - MTL-FIDELIO-WAC-BRTS

(4) - M3x6 Flat Head Machine Screws, black - M3x6MM-BFH

(2) - 4” Nylon tie-wrap, black -CBL-TIE-4IN14

(1) - 7” Touchscreen Tablet Computer (v1.1.2 or v2.2.0) – FIDELIO-TS

(1) – For Tablet v1.1.2 - USB Cable, Mini A - Type A - No Part Number

(1)
– For Tablet v2.2.0 - USB Cable, Micro B – Type A–CBL-FIDELIO-TS-MICROB-AF

(1) - 5V Power Supply with dual connectors - PS-HDVI (Modified)

(1) - AC Power Cable - Power Cable

(1) - USB Power Adapter- CPTVW-ACC